Newsletter | April 27, 2021

04.27.21 -- How To Increase Your Medtech Growth Trajectory In Indirect Markets

 
Sponsor
Featured Editorial
Industry Insights
A GMP Implantable-Grade Bioresorbable Polymer Powder Breakthrough For The 3-D Printing Of Medical Devices Using SLS Technology

Selective laser sintering (SLS) systems use a high-powered laser to selectively melt and fuse powder particles of a bioresorbable polymer in a layer-by-layer process to manufacture a final implantable medical device part. Depending on the part geometry, these systems can typically print geometries as small as 0.4 mm with a tolerance of +/- 0.25 mm.

Five Considerations For Working With A Molder — Early In The Product Design Phase (Do’s And Don’ts)

When developing a part or device for the medical or optic industries, the goal is always to get that part to market as quickly as possible. The key to doing just that: developing a strong relationship with a molder early in the part design process.

Transcutaneous Electrical Nerve Stimulation (TENS): An Overview Of Its Expanding Role In Pain Management

The gate theory of pain states that before reaching the brain, pain messages pass through a series of nerve “gates” in the spinal cord. This white paper discusses TENS technology, how it works, and the advantages this treatment has over alternative pain management techniques.

Automation Of Class III Medical Device Packaging

This article will explore the need for sensitive and fast automated CCI testing technologies that are also reliable and how existing solutions can help achieve optimum quality goals for medical device manufacturers.

Cleaning And Disinfecting Viruses And Other Pathogens

Per Center for Disease Control (CDC) guidelines for cleaning and disinfecting viruses and other pathogens, any form of disinfection necessarily follows cleaning and rinsing. Disinfection can be done with bleach solutions, 70 percent alcohol solutions, or other products with EPA-approved emerging viral pathogens claims. Bleach solutions must reside on the surface for at least one minute and can be made as follows.

Articles You May Have Missed
Resources