Product/Service

Leak Testing — Package Integrity Testing

Source: PTI Packaging and Inspection Systems

VeriPac225_1

VeriPac leak testers provide non-destructive inspection of packaging for offline and online applications and QA/QC process control. VeriPac inspection systems utilize an ASTM approved vacuum decay leak test method recognized by the FDA as a consensus standard for package integrity testing (ASTM F2338-05).

Request Information
Click Here To Download:

Click here to request information or to discuss active projects.

VeriPac leak testers provide non-destructive inspection of packaging for offline and online applications and QA/QC process control. VeriPac inspection systems utilize an ASTM approved vacuum decay leak test method recognized by the FDA as a consensus standard for package integrity testing (ASTM F2338-05). This test method was developed using VeriPac leak test instruments.

VeriPac's non-destructive technology is capable of detecting package leaks and invisible defects using an absolute or differential pressure transducer leak test system. Test components are optimized according to the type of package being tested and the level of sensitivity required. VeriPac leak testers are designed to inspect flexible, rigid and semi-rigid packaging including Tyvek® trays and pouches.

VeriPac 225

  • Leak detection for packages with defect profile >25 microns.
  • Seal integrity of Tyvek®/paper lidded packages.
  • Absolute vacuum transducer.
  • Vacuum decay results measured in Mbar/sec.

Click here to request information or to discuss active projects.

 

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information

PTI Packaging and Inspection Systems