E-Z Bond Solvent Dispenser

Lakeview Equipment's E-Z Bonder is versatile, productive, and easy to use. It is designed for quickly coating a medical tubing or fitting O.D. prior to assembly. Its affordable cost makes it practical to use in multiple-station assembly operations.

Features:

• E-Z to reduce undesirable solvent fumes from production area.
  
• E-Z to apply a uniform coating of solvent to O.D. of tubing or fitting.
  
• E-Z to increase production--no dripping or blotting.
  
• E-Z to reduce solvent usage.
  
• E-Z to use--tubing O.D. orifices at each end of dispensing wick.
  
• Two-position stainless mounting base for production comfort; suction cups provide firm mounting to work surface.
  
• E-Z flow of bonding material, either by gravity feed or by capillary feed, depending on mounting position.
  
• E-Z to refill; solvent level is E-Z to read. Bottle capacity is 4 oz. (125 ml).
  
• E-Z to make to your exact O.D. needs.
  
• E-Z to replace dispensing wicks for cleaning or replacement.

How It Works:

1. Insert the tubing or fitting into the dispensing wick orifice (note: this orifice has been customized to fit your application).
2. Apply solvent to part with a twisting and pushing motion.
3. Remove the tube or fitting from the wick and immediately assemble the parts.
4. Allow sufficient time for bonding action to take place before attempting to pull apart. Bonding time will depend on the type of solvent as well as the materials of the parts. Test for the correct time for your assembly.

Lakeview Equipment, 3382 Commercial Avenue, Northbrook, IL 60062. Tel: 847-564-7700; Fax: 847-564-3888.