NAVIGATOR II-S (SPIN CAPABLE)
Source: ACC Automation Co.
System is available for Solvent-Based Solutions
* Vertical axis stroke of 24 inches (600 mm).
* Vertical axis speed range of 0.01 -12.00 in./second (0.25 – 300 mm/second).
* Vertical axis speed increments of 0.001 in./second (0.025 mm/second).
* Rotate axis positional range of +/- 1440 degrees.
* Rotate axis Positional Increments of 1.0 degrees.
* Rotate axis speed range of 0.1-60.0 degrees./second.
* Rotate axis speed increments of 0.1 degrees.
* Spin axis speed range 10 – 100 RPM.
* Spin axis speed is manually adjustable in approx. 3-5 RPM increments.
* Maximum payload capacity of 5 pounds ( 2.27 Kg.)
* System is available for Solvent-Based Solutions.
* 110 Volt Operation.
* Removable pallet size, approximately 5 inches square, with additional configurations available.
* Operator interface program and hardware including a PC with a minimum operating capacity of 400Mhz, Pentium III AT or Mid-Tower with a Windows 98 Operating system software.
* Unit is available with many custom features.
* Manual or automated horizontal, fourth axis motion available.
* Vertical axis speed range of 0.01 -12.00 in./second (0.25 – 300 mm/second).
* Vertical axis speed increments of 0.001 in./second (0.025 mm/second).
* Rotate axis positional range of +/- 1440 degrees.
* Rotate axis Positional Increments of 1.0 degrees.
* Rotate axis speed range of 0.1-60.0 degrees./second.
* Rotate axis speed increments of 0.1 degrees.
* Spin axis speed range 10 – 100 RPM.
* Spin axis speed is manually adjustable in approx. 3-5 RPM increments.
* Maximum payload capacity of 5 pounds ( 2.27 Kg.)
* System is available for Solvent-Based Solutions.
* 110 Volt Operation.
* Removable pallet size, approximately 5 inches square, with additional configurations available.
* Operator interface program and hardware including a PC with a minimum operating capacity of 400Mhz, Pentium III AT or Mid-Tower with a Windows 98 Operating system software.
* Unit is available with many custom features.
* Manual or automated horizontal, fourth axis motion available.
ACC Automation Co., 475 Wolf Ledges Pkwy, P. O. Box 569, Akron, OH 44309. Tel: 330-762-9188; Fax: 330-762-1113.