Production Safety Analyzer

QuadTechn 6100 Production Safety Analyzer is designed for production testing of medical electronic products and instruments. The unit performs five essential electrical safety tests in one unit, in accordance with UL, CSA, and IEC standards such as UL2601-1, UL1563, UL1950 and UL544. Without changing the connection to the device under test, the analyzer offers a total solution in production testing of single-phase products (<10 A current), eliminating the need for multiple test stations and reconnecting cables. The instrument can perform AC Hipot Tests from 50 to 5000 V, DC Hipot tests from 50 to 6000 V, insulation resistance (IR) measurements over the range of 100 kW to 50 GW, ground bond testing to 30 A and line/earth leakage measurements from
0.1µA to 9.999 mA.

Current trip levels for the AC and DC Hipot testing functions can be programmed over a range, 1µA to 40 mA AC and 0.1µA to 20 mA DC, providing flexibility in testing a range of devices. The analyzer's insulation resistance test (similar to DC Hipot test) calculates and displays a product's insulation resistance value in ohms at any programmed test voltage between 50 and 1000 V DC. The ground bond test is capable of supplying 1 to 30 A for verifying the integrity of a product's ground system. The earth leakage current test can be set to measure the current flowing through a product's line cord ground connector in three possible configurations; normal operating conditions, reverse line, or a single fault mode with one of a possible five human body models selected, all in accordance with UL standards. Additionally, the unit is capable of monitoring line voltage, current or power consumption (VA) during this earth leakage current test.

<%=company%>, 5 Clock Tower Place, 210 East, Maynard, MA 01754. Phone: 800-253-1230; Fax: 508-485-0295.