Product/Service

Self-Clinching Standoffs

Source: Penn Engineering
These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes - and become permanently mounted in thin stainless steel sheets.
These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes - and become permanently mounted in thin stainless steel sheets.

MATERIAL & FINISH SPECIFICATIONS

  • FASTENER MATERIAL: 400 Series Stainless Steel.
  • FINISH: Passivated and/or tested per ASTM A380.
  • SHEET HARDNESS: 88 or less on the Rockwell "B" scale.
  • THREADS: Internal, ANSI B1.1, 2B ANSI/ASME B1.13M, 6H.
These standoffs, which use the proven self-clinching design, install with a squeeze in punched or drilled round holes – and become permanently mounted in the thin sheet.

PEM brand standoffs are installed with their heads flush with one surface of the mounting sheet. When blind-threaded types are used, outer surfaces are not only flush, but closed as well.

Penn Engineering, 5190 Old Easton Rd., Box 1000, Danboro, PA 18916-1000. Tel: 215-766-8853; Fax: 215-766-0143.