Wire EDM & Conventional EDM (CNC) Centers
We unite the latest generation of Electrical Discharge Machining (EDM) technology with comprehensive and progressive experience.
Short run or high volume, our EDM center contains the power, precision, and production capacity to deliver consistent quality and satisfaction to you. With tolerances routinely held within .0001 and repeatability within .000050.
Both wire and conventional CNC (Die Sink) machines in the EDM Center produce tight tolerances, improved surface finishes (compared to grinding), and complex geometry required by today's competitive marketplace. For demanding micro machining we are capable of producing slots down to .0016" wide and .0008" radii, and thru holes as small as .0008" - .001".
We welcome the challenge of your most intricate parts. We can help you bridge the gap between theory and practice.
EDM EQUIPMENT LIST
Agie - Agie Cut Classic Wire EDM
Agietron Mondo - 30 EDM
(2) Agietron EMT 1.10 EDM
Charmilles Robofil 6020 Wire EDM System
Charmilles Robofil 4020.2 Wire EDM System w/ Micro-Cut 1000 & Micro-Fin
Charmilles Roboform 2400 QCR - 40 Tools plus 8 Pallets
(2) Charmilles Roboform 20 w/C-Axis System and Four Position Tool Changer
Charmilles Roboform 20A w/C-Axis & Tool Changer
Charmilles Roboform C-200 w/C-Axis & Forty Station Tool Changer
(2) Charmilles Robofil 310
Charmilles Robofil 330 F
Charmilles Robofil CR-100
Charmilles Form-20
Andrew Engineering Traveling Wire EDM Model #2123
Andrew Engineering Traveling Wire EDM Model #123
Eltee EDM TRIM 20 / EP 30
Eltee EDM TRIM 21 / P300CP
Wilsey / Royal NC-812 EDM System
Brother HS 3600 Wire EDM
(2)High Speed Small Hole Popping/Drilling Capabilities
EDM Support Tooling
3R Tooling
Erowa Tooling
Wilsey Tool Company, 140 Penn Am Drive, Quakertown, PA 18951. Tel: 215-538-0800; Fax: 215-538-0860.