PTI Inspection Systems launched a new groundbreaking technology at Interphex 2016 for testing blister packs. The VeriPac UBV Leak Detection System is a deterministic non-destructive technology designed specifically for multi-cavity blister packs. The VeriPac UBV utilizes volumetric imaging under vacuum to detect the presence of leaks. It’s a simple, rapid 3-step process to test a blister pack. Operators input the number of blister cavities, place the blister pack on the inspection plate and press the START button. Within seconds, the operator sees a definitive pass/fail result, along with a volumetric measurement reading. The location of the defective cavity is also identified. This technology is unique in that it can provide rapid detection of defects as small as 10 microns in a test cycle of less than 15 seconds using no tools or test parameter changes.