Electronics White Papers, Case Studies, & Application Notes
-
How To Select An RFID Partner To Enhance Your Medical Devices
3/6/2024
Discover RFID's advantages in medical devices, guidance for supplier selection, and success stories from healthcare's RFID integration, offering valuable insights and practical examples.
-
15 Reasons To Implement RFID In Medical Devices
3/4/2024
Discover the importance of integrating RFID technology into medical devices for improved tracking, supply chain management, and patient safety — enhancing security, traceability, and compatibility.
-
Surgical Robots For Minimally Invasive Procedures
10/2/2017
Today’s next-gen surgeries comprise the least invasive procedures to date through the use of Intuitive Surgical Inc.’s da Vinci S HD Surgical System. This paper introduces different parts of these surgical robots, how they operate, their advantages, and how maxon motors are used in these systems.
-
Machine Optimization Through DC Motor Selection
9/13/2017
DC motor selection is argued to be one of the most important steps in providing motion control of a medical machine. This article points out the basic differences between DC brushed and brushless motors, what they can do, where they fit best, and how to make a selection for each application.
-
Laser Beam Diagnostics In GHz Applications
6/5/2017
It usually is insufficient to rely on one standard measurement technology when working with applications in exotic optical wavelengths and unusually low average powers. This white paper goes through an example of calculating many laser beam diagnostics within high GHz applications.
-
Working In The Basement: Measuring Signals Below The Noise Floor With A Lock-In Amplifier
6/5/2017
This article presents the advantages of using lock-in amplifiers for measuring signals below the noise floor, how they work, and available devices from Ophir.
-
Designing Interface Electronics For Zirconium Dioxide Oxygen Sensors Of The XYA Series
3/20/2017
This application note describes the basic building blocks needed to create an interface circuit for the XYA series sensors if not using on of First Sensor’s ZBXYA interface boards for sensor control and conditioning.
-
Wearable Sensors: From The “Skin-Side” Out
3/3/2016
This white paper discusses the challenges of designing wearable sensors with human skin in mind, and how to select materials that interface well with the human factor. It is easier to design in a good interface from the start than have to retrofit a solution late in the process.
-
Optimizing Motion Systems For DNA Sequencing
10/5/2015
This white paper discusses game changing process optimizations will reduce the cost of sequencing individual genomes, and help bring about the reality of personalized medicine for everyone.
-
Connectors in Medical Electronics
1/15/2015
This white paper will educate you on the key issues you should consider when selecting connectors for use in medical devices and provide information on a potential interconnect solution for your next electronic device design.