Design Components

61. EMC Compliance Testing from 1 to 6 GHz: 100S1G6AB 3/26/2015

    As its title would indicate, the 100S1G6AB is a solid-state amplifier ideal for testing medical devices for EMC compliance. It covers the 1 to 6 GHz frequency range and can provide up to 100 Watts of output power when used with a sweep generator.

62. Horn Antenna for EMC/EMI/RFI Susceptibility Testing 4/6/2015

    Electronic medical devices need to be tested for EMC/EMI/RFI susceptibility to ensure that they remain immune to interference from cell phones, other electronic medical equipment, or other sources of RF emission. The ATH800M6G is a high-gain horn antenna covering the 0.8 to 6 GHz frequency range and has been designed for such EMC testing applications.

63. Visco-Jet^® Micro-Mixer 5/11/2015

    The Visco-Jet® Micro-Mixer is composed of 36 critically controlled spin chambers that subject the incoming liquids to a vigorously repeated mixing process. The mixing energy is drawn from the liquids themselves so no electrical or mechanical input is required.

64. Micro Molding Medical Grade Materials 12/11/2015

    ProMed offers micro molding services for both long-term and short-term implantable medical device components, making parts as small as .002g and shot sizes up to 3g. They have experience with a variety of medical-grade plastic materials (thermoplastics) such as EVA, PSU, PLA, PLGA, PEEK, Filled PEEK, and Ultem. They also work with Polycarbonate, ABS, and Pebax.

65. CMOS Image Sensor 6/20/2000
    The company offers a 0.35 micron CMOS Image Sensors (CIS) process technology.
66. Component Realization (Thermoplastic, Silicone, Micro) 3/4/2015

    Since our inception, complex thermoplastic injection molding has been a core competency at SMC. We specialize in programs that rely upon complex geometry and challenging quality requirements. Using “scientific molding” practices we assure premium components with each press cycle. With our vast array of molding options, we are confident we can align a process that best fits your medical device.

67. Cleanroom Injection Molding for Disposable Medical Devices 12/11/2014

    Phase 2 Medical’s Rochester, NH location was recently outfitted with 2,500 sq. ft. ISO Class 8 (100,000) cleanroom facility with an injection molding press. This was done in an effort to integrate quality plastic components in their customers’ disposable medical devices.

68. IDI Coaxial Probes 4/27/2015

    IDI Coax Probes consist of an extensive line-up of high reliability coaxial probes uniquely designed to address specific requirements such as testing at high frequencies, or needing an RF interconnection. The probes include features such as a controlled impedance signal path with reliable connect/ disconnect operations, a ring, quadrant or rectangular array footprint, customizable power, ground and signal paths, and advanced mechanical docking and interconnection systems.

69. Mini Hybrid Connectors 9/10/2012

    Mini Hybrid Connectors from Colder Products Company provide a compact, single connection point for power and air, eliminating the need for multiple connections between remote tools and a device.

70. Avalanche Photodiodes High Energy Radiation Detection Applications and Molecular Imaging 3/28/2011
    Large Area Si-APDs – UV-Enhanced APDs
    The Large Area Silicon Avalanche Photodiode (Si-APD), C30739ECERH, is intended for use in a wide variety of broadband low light level applications covering the spectral range from below 400 nm to over 700 nm. It has low noise, low capacitance and high gain and is designed to have enhanced short wavelength sensitivity, with quantum efficiency of 60% at 430nm. This Si-APD is well suited for applications including molecular imaging, fluorescence detection and nuclear research.