Design Components

41. Tethered Silicone Caps For Tube Protection: MCN-TCS Series 5/5/2016

    Caplugs offers the MSN-TCS Series of tethered silicone caps for protecting tubes and ports from contamination. The caps are constructed from USP class VI silicone, and are designed for easy removal and reapplication for a variety of medical procedures such as fluid draining.

42. EMC Compliance Testing from 1 to 6 GHz: 100S1G6AB 3/26/2015

    As its title would indicate, the 100S1G6AB is a solid-state amplifier ideal for testing medical devices for EMC compliance. It covers the 1 to 6 GHz frequency range and can provide up to 100 Watts of output power when used with a sweep generator.

43. Brushless DC Servomotor: 1218...B Series 8/5/2013

    With MICROMO’s brushless DC electric motor, the ironless, self-supporting, skew-wound copper coil is a component of the stator.

44. Air/Gas Micro Diaphragm Pumps: CTS Series 7/22/2014

    Parker Hannifin’s CTS series of 2.5 LPM free flow air and gas micro diaphragm pumps are ideal for applications involving surgical instrumentation, patient monitoring, compression therapy, negative pressure wound therapy, and medical consumer devices.

45. Air/Gas Micro Diaphragm Pumps: T2-05 Series 7/25/2014

    Parker Hannifin’s T2-05 series of air and gas micro diaphragm pumps are used in patient therapy and patient monitoring applications. Their compact size allows them to fit into tight spaces, making them ideal for integration into handheld devices, such as portable negative pressure wound therapy devices.

46. Brushless DC Motors 4/24/2008
    MicroMo Electronics’ brushless DC motors the ironless, self-supporting, skew-wound copper coil is a component of the stator. The mechanical commutation system in these motors is replaced by an integrated sensorless electronic unit with speed control
47. Xenon Flash Lamps for Medical Devices 11/8/2013

    Hamamatsu’s Xenon flash lamps feature a long lifetime, low heat output, a high intensity output, and high stability. They’re ideal for use in blood analyzers and in instruments for in vitro diagnostics.

48. Smart SPR SS-1001: Bio-Sensing Instrument For New Measuring Methods 12/21/2010

    Dissatisfied with conventional biological materials methods because they do not produce satisfactory results? SPR measurement is attracting interest as a method of quickly and simultaneously measuring a number of interactions between biological molecules in order to understand biological functions.

49. Selective Laser Sintering (SLS) for Additive Manufacturing 10/21/2014

    Selective laser sintering is an additive process that draws on a bed of thermoplastic powder to create a fully sintered, Nylon-based part. This technique is ideal for parts with highly complex geometries.

50. Intelligent Vision Sensor: VC μ Check System 11/13/2012

    This vision sensor system is ideal for print and surface inspection, identification, positioning and alignment, 2D and 3D measurements, and other applications where very small components need to be inspected. The system itself is comprised of an intelligent camera with a 700 MHz processor and a tele-centric lens enclosed in a 15.8 x 9.8 x 6.5 cm housing.